SIPLACE S-Feeder Spare Parts
-
Adapter plate SIPLACE S/F change-over table without wheels version 2 for reel holder 3x8mm or 3x8mm 0201/0402 feeder respectively
-
Dip module f. fluxes and adhesive
-
SIPLACE Tape feeder for 1 x 88mm tape, with electric drive and cover tape storage bin, 4mm to 96mm feed increments, for SIPLACE F and HF/X/D-Series. 3.5 feeder locations required per module.
-
Tape feeder module 3x8mm SL SIPLACE
-
Feeder module for 1 x 12mm or 1 x 16mm tape (reconfigurable), 4mm - 16mm feeding pitch with motorized drive and integrated cover foil removal for SIPLACE 80S-15/20/F/F4, 1 feeder location required per module From SW version 402.03 ( S-20/F4) or 9.02
-
Feeder module for 1 x 24mm or 1 x 32mm tape (reconfigurable), 4 - 32mm feeding pitch with motorized drive and inte- grated cover foil removal for SIPLACE 80 S15/20/F/F4/F5/S23HM, 1 feeder locations required per module. From SW version 402.03 or 9.02
-
Feeder module for 1 x 44mm tape 4 - 44mm feeding pitch with mo- torized drive and integrated cover foil removal for SIPLACE 80F/F4. 2 feeder locations re- quired per module. From SW version 402.03 or 9.02
-
Feeder module for 1 x 56mm tape 4 - 56mm feeding pitch with motorized drive and integrated cover foil removal for SIPLACE 80F/F4 2,5 feeder locations required per module. From SW version 402.03 or 9.02
-
Feeder module for 1x72mm S-tape 4 - 72mm feeding pitch with mo- torized drive and integrated cover foil removal for SIPLACE 80 F/F4/F5
-
Feeder with tape return mechanism for tantalum capacitor types E for 1 x 12mm tape with electric motor and cover foil pick-up, 4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23 and SIPLACE 80 F/F4/F5 HM.
-
Feeder with tape return mechanism for tantalum capacitor types C/D for 1 x 12mm tape with electric motor and cover foil pick-up, 4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23 and SIPLACE 80 F/F4/F5 HM.
-
Feeder module for 1 x 24mm or 1 x 32mm tape (configurable),up to 25mm tape height,4mm/40mm feeding pitch, with motorized drive and integrated cover foil removal,for SIPLACE. 1,5 feeder locations required per module. From SW version V402.03.
-
Feeder module for 1 x 44mm tape,up to 25mm tape height,4mm/52mm feeding pitch, with motorized drive and integrated cover foil removal,for SIPLACE F and HF/X-Series. 2 feeder locations required per module. From SW version V402.03 or V9.02.
-
Feeder module for 1 x 56mm tape,up to 25mm tape height,4mm/68mm feeding pitch, with motorized drive and integrated cover foil removal,for SIPLACE F and HF/X-Series. 2,5 feeder locations required per module. From SW version V402.03 or V9.02.
-
Feeder module for components in stick magazines. Magazine width 4,5mm, 9,5mm, 15mm and 30mm. Electrically driven with electronic control for all SIPLACE 80 S and 80 F types. Use only with feeder change over table software version 003.005, Item-No. 328713-
-
Basement for Bulk-Case-Feeder for SIPLACE 80 S15/S20, SIPLACE S23HM, SIPLACE 80 F/F4/F5
-
BELT BIN PLUG-IN AXIS 44 MM
-
BELT BIN PLUG-IN AXIS 56MM
-
ball bearing, radial deep groove
-
Loctite 601
-
Silikon E43 transparent
-
O-RING 5*1
-
PLUG-IN AXLE TYPE 8/12/16
-
FORK LIGHT BARRIER
-
CABLE FOR BELT FEED MODULE
-
COMPRESSION SPRING 0,16*1,36*6,7
-
LOCKING
-
Cover strip control unit Replacement by trained staff
-
STRIP BOARD
-
COMPONENTS COVER
-
STRIPPING DEVICE 1
-
TOOTHED WHEEL UNIT-ABOVE
-
COMPRESSION SPRING 0,5*3,5*20,7 V2A
-
COMPRESSION SPRING 0,6*5,6*18 V2A
-
bolt
-
roll 1
-
STRIP REMOVAL EDGE 8MM FEEDERMODUL EL.
-
Flap
-
SPRING
-
INSERT FOR 8mm S-FEEDER
-
DRIVER FOR COMPONENT-COVER
-
Flap
-
STRIPPING DEVICE 2
-
DICE 20 * 20 * 20MM
-
PROTECTION RING
-
Transparent adhesive foil Typ 65026
-
SPRING PLATE
-
STRIP OSCILLATING CRANK
-
SAFETY VARNISH RED
-
Loctite adhesive
-
SPLICE STRIP
-
CONSUMABLE PARTS KIT 1 F.FEED MODULE 2*8MM-S
-
COMPONENT-MAGAZINE LONG W15,8/H9,2/O-L26
-
LONG-LOK-SCREW
-
pedestal complete
-
STRIP
-
CHANNEL COVER
-
Control for 12-88mm S tape modul
-
JOINT BEAM,FRONT 12/16mm TAPE
-
JOINT BEAM, REAR 12/16mm TAPE
-
JOINT BEAM 24/32mm TAPE
-
SPRING PLATE COMPLETE
-
SPRING PLATE
-
BELT SPRING
-
BELT SPRING
-
BELT SPRING
-
BELT SPRING
-
TAPE CHANNEL, BELOW, BEHIND
-
ADJUSTING SCREW
-
TAPE CHANNEL, BELOW, BEHIND
-
TAPE SUPPORT
-
TAPE CHANNEL BELOW MIDDLE
-
BELT CLIP FOR 12mm BELT
-
BELT CLIP FOR 24mm BELT
-
SPACER AHEAD
-
SPACER AHEAD
-
SPACER AHEAD
-
SPACER AHEAD
-
SPECIAL SCREW
-
SUPPORT TOP FOR ROCKER 1
-
AXIS
-
SHAFT FOR ROCKER2 24/32mm TAPE
-
SHAFT FOR ROCKER2 44mm TAPE
-
SHAFT FOR ROCKER2 56mm TAPE