SIPLACE D4 Spare Parts
-
Spare Part Kit for the 6 and 12-Segment Collect and Place Head (DLM3) mount on SIPLACE D1,D2,D3,D4. Contains critical spares. Reduces the rampup time after production interrupts through spares available at the customer site.
-
Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE D4i/D2i/D1i equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange against standard digital component camera. The stan
-
LP-CAMERA (TYP34) 28 digital RK
-
COMPONENT-CAMERA C+P(Type29) 27x27 digital RK
-
COMPONENT-CAMERA C+P(Type28) 18x18 digital RK
-
CUTTER PNEUM.F.12 TAPE MODULE 8MM
-
When replacing a defect BoxPC the following items need to be replaced from the defect PC and added to the new PC, because they are not included to the BoxPC: - 03032343 Hotlink-Interface PCI-A14-K01 or 03052135 Hotlink-Interface PCI-A24-K01 (there might b
-
SIPLACE Compact Server 6 (Econel 100)
-
HOLDER SICK BC-READER
-
Barcode-Reader 2D ICR850-2Z1920S06
-
Sleeve with ball fixing compl. DLM1 / 12
-
TURNING SYSTEM/DLM
-
PC-BOARD SUPPORT (94mm)
-
Communication unit change-over table HS50
-
KEYBOARD KB PC S2
-
Spare Part Kit for SIPLACE D4. For the placement heads there has to be ordered an additional Spare Part Kit: Item.No.: 171181 Spare Part Kit SIPLACE C+P Head DLM3.
-
The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, X/D-Series and HS-xx in combination with the 12-Segment Col
-
Valve Plunger complete SP12 (plastic)
-
NOZZLE Type 706/906 Vectra-Ceramic
-
LABEL NUMBER 204
-
Protective gloves latex
-
SIPLACE clean sticks
-
Edge protection type 4610026 (Happich)
-
ADHESIVE TAPE Scotch 927 Please take care of the best before date of the adhesive Scotch tape Y- 9460. If the best before date has expired the tape should not be used to glue the scale. After usage keep the adhesive tape in the air sealed and UV resistanc
-
HOSE COMPL. / DLM1
-
GREASE TOPAS NCA 52 50ml
-
SEGMENT-CLEANING RAG
-
UNISILIKON GREASE L 250 L 60GR
-
Components camera C+P (Type30) 27x27 digital
-
12-segm. C+P head DLM3 / w.out sleeves
-
Machine controller MicroBox 420 V2
-
12-segm. star compl. DLM3
-
Pneumatic System/HS6x
-
When replacing a defect BoxPC the following items need to be replaced from the defect PC and added to the new PC, because they are not included to the BoxPC: - 03032343 Hotlink-Interface PCI-A14-K01 or 03052135 Hotlink-Interface PCI-A24-K01 (there might b
-
Encoder bracket, X axis (D4_revised)
-
Scale X axis f. D4
-
Gas spring 350N (D4)
-
Partition Plate
-
Cable Clip VM-1010
-
Main Error Lamp
-
Foam rubber profile 1566 L=140
-
Fan hood 1-piece SX12/DX12
-
Handle GN 528-ESD-117-8,5-SW
-
waste tape container / COT D4
-
Read head MS22 X/Y 677mm
-
Encoder Bracket Y-axis (D4)
-
Hubzylinder 40 x 30ST
-
Rectifier brigde 800V 35A
-
Rectifier brigde 1200V 166A
-
AC-to-DC converter 24V 20A
-
writing Siplace white adhesive 170
-
writing ASM white adhesive 140 mm
-
Follower item for 03052590-03 Can-card PowerCAN-PCI Please pay attention to technical information TI2011-09C01: Up to SW705.03 a driver SW installation is needed. Therefore the replacement of the CAN-PCB can only be done by a SIPLACE Service expert. Becau
-
Splitter cable VGA 2 port
-
Wire Grid for 120mm Fans
-
D4 Gas Spring (Long Hinged Bolt)
-
ISO 7092 - 4 - 200 HV - A2
-
Swing top compl. / R2
-
D4 Bar Code Label Sector 4
-
D4 Bar Code Label Sector 2
-
D4 Bar Code Label Sector 3
-
LOCKING PLATE D4 / 01005
-
D4 Bar Code Label Sector 1
-
Round cable set: C+P-Cam. (Type28,29,38)
-
DVD Re-writer External
-
Main switch 3LD2 with shaft length 55mm
-
Power supply 5V 5A
-
Line filter 3ph 25A
-
AXIAL BLOWER
-
Components Table Lock 1/3
-
Components Table Lock 2/4
-
Axis Unit A364
-
ISO 4762 - M 4 x 5-A2-70
-
Air distributor compl.
-
Swiveling Unit Lifting Table
-
spring 1.8x10.2x62.7 (D-234B) (black)
-
LCD Monitor 24VDC with Touch
-
Sleeve SP12 comp. / 270degree partition
-
Light barrier z-axis top
-
USB Hub 2.0 4-Port DUB-H4
-
Hexagon Shaft 8 Complete - 480mm
-
SN 62355 - M5x10-10.9, verz. DSP
-
Hotlink-Interface PCI-A24-K01
-
Holdern 5 grd