SIPLACE D2 Spare Parts
-
S/F-D launch box
-
El.-Mag.-Valve CPE10-M1BH-5/3G-QS6-B
-
Sleeve SP12 comp. / 270degree partition
-
Wire Grid for 120mm Fans
-
Gas spring 400N (D1D2)
-
nozzle type 720/920 cpl.
-
COMPONENT-CAMERA C+P(Type29) 27x27 digital RK
-
Component reject box S-D
-
Rectifier bridge 600V / 25A
-
air distributor D1/2 complete
-
Splitter cable VGA 2 port
-
Gas spring 420N (D1D2)
-
NOZZLE Type 706/906 Vectra-Ceramic
-
LP-CAMERA (TYP34) 28 digital RK
-
Modul / temperature measuremen head
-
Safety Switch Combination, Right
-
LCD Monitor 24VDC with Touch
-
Follower item for 03052590-03 Can-card PowerCAN-PCI Please pay attention to technical information TI2011-09C01: Up to SW705.03 a driver SW installation is needed. Therefore the replacement of the CAN-PCB can only be done by a SIPLACE Service expert. Becau
-
Gas spring 460N (D1D2)
-
Valve Plunger complete SP12 (plastic)
-
Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE D4i/D2i/D1i equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange against standard digital component camera. The stan
-
S-F-D Mini Output Flap, Complete
-
Safety Switch Combination, Left
-
spring 1.8x10.2x62.7 (D-234B) (black)
-
writing ASM white adhesive 140 mm
-
When replacing a defect BoxPC the following items need to be replaced from the defect PC and added to the new PC, because they are not included to the BoxPC: - 03032343 Hotlink-Interface PCI-A14-K01 or 03052135 Hotlink-Interface PCI-A24-K01 (there might b
-
Valve Plunger complete SP6 (plastic)
-
Spare Part Kit for the 6 and 12-Segment Collect and Place Head (DLM3) mount on SIPLACE D1,D2,D3,D4. Contains critical spares. Reduces the rampup time after production interrupts through spares available at the customer site.
-
Bar Code Label Right F-D
-
Cable: CAN-Bus 2 Sub
-
Swiveling Unit Lifting Table
-
writing Siplace white adhesive 170
-
CUTTER PNEUM. SIPLACE HF
-
The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, X/D-Series and HS-xx in combination with the 12-Segment Col
-
Bar Code Label Left F-D
-
Grounding input left side
-
Axis Unit A364
-
AC-to-DC converter 24V 20A
-
12-segm. star compl. DLM3
-
KEYBOARD KB PC S2
-
Safetyswitch AZ15/16 combination
-
X-brake
-
AXIAL BLOWER
-
Rectifier brigde 1200V 166A
-
6-Segm. Stern kplt. DLM3
-
PC-BOARD SUPPORT (94mm)
-
Safetyswitch AZ15/16 combination
-
Cable: CAN-Bus 2 D2
-
Line filter 3ph 25A
-
Rectifier brigde 800V 35A
-
Machine controller MicroBox 420 V2
-
TURNING SYSTEM/DLM
-
PCB CAN-BUS terminator component table
-
Empty tape channel D1/D2
-
Power supply 5V 5A
-
Solenoid Valve 5/2-Micro Valve 518
-
12-segm. C+P head DLM3 / w.out sleeves
-
Sleeve with ball fixing compl. DLM1 / 12
-
Incremental encoder MS101 X-axis/S/F-D
-
Holdern 5 grd
-
Main switch 3LD2 with shaft length 69mm
-
Handle GN 528-ESD-117-8,5-SW
-
6-segm. C+P head DLM3 / w.out sleeves
-
SHAFT DLM1 / 6
-
COVER, HEADBOARD D-Serie, COMPLETE
-
Cable: Contol computer - USB-Hub
-
DVD Re-writer External
-
Fan hood 1-piece SX12/DX12
-
Components camera C+P (Type30) 27x27 digital
-
Incremental encoder MS101 Y-axis/S/F-D
-
Cable /s-D Placementhead
-
Gas Spring 6/15
-
Round cable set: C+P-Cam. (Type28,29,38)
-
Foam rubber profile 1566 L=140
-
HOSE 4*2,5 PUR TU 0425 BU-20
-
Barcode-Reader 2D ICR850-2Z1920S06
-
Positioning unit dp-Station
-
Hotlink-Interface PCI-A24-K01
-
LOCKING PLATE D4 / 01005
-
waste tape container / COT D1/D2
-
HOSE COMPL. / DLM1
-
HOLDER SICK BC-READER
-
Actuator AZ 15/16-B1 Security switches and actuators are part of the safety provisions of the SIPLACE placement machines and are only to be used in situ in the location and positions provided for them. Impropper usage can result in serious personal or mac
-
Cable harness power supply - D2