-
Regulator unit for linear and bulk vibrator feeders for use with 142025 Type II. Required for use with SIPLACE . 1 regulator unit required per module. -
Nozzle changer for 6 nozzle C+P Head SIPLACE 80 F4/F5 Station software version 403.xxx or higher Line computer software 403.xxx or higher Option includes: 2 magazines for big nozzles 3 magazines for small nozzles
-
Adapter plate SIPLACE S/F change-over table without wheels version 2 for reel holder 3x8mm or 3x8mm 0201/0402 feeder respectively
-
Kit to splice component tapes. Includes SIPLACE splicing gripper (classic version for single strips), splice strip box, tape connectors, tape threaders, holder, operater tools, Job Poster. For first equipping of new customers.
-
Additional component vision module SIPLACE 80 F/F4/F5 for flip chip bump centering. Field of view: 9mmx11.5mm. Largest flip chip with single measurement: 7mm x 9mm.Smallest,reliably recognizable bump diameter: 0,1mm. Reliable processing of IC pitch: 0,25m
-
Additional component vision module SIPLACE 80 F/F4/F5 for flip chip bump centering. Field of view: 9mmx11.5mm. Largest flip chip with single measurement: 7mm x 9mm.Smallest,reliably recognizable bump diameter: 0,1mm. Reliable processing of IC pitch: 0,25m
-
Additional nozzle changer for IC head
-
ESS Docking Unit for COTF-X (HW)
-
Dip module f. fluxes and adhesive
-
DCA camera
-
The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, X/D-Series and HS-xx in combination with the 12-Segment Col
-
Mechanical Head Crash Protection for SIPLACE S-20, S-23 HM, S-25 HM and S-27 HM to avoid a head crash with feeders and/or feeder flaps. Restriction 6-Segment Collect and Place Head with nozzels type 820/821/921.
-
The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location
-
CO camera, stationary P+P (type 20) 8x8
-
The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location
-
Additional high resolution, stationary component camera digital in X-Series,D1,D3 machines for centering of FlipChips. With this head a component range from 0.2mm x 0.2mm up to 16mm x 16mm can be placed. The smallest ball diameter is 80um, the min. Lead /
-
Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE X-Series (SCSW 605)equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange between standard digital component camera. T
-
Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE D4i/D2i/D1i equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange against standard digital component camera. The stan
-
Package for placement of 01005 components (size 0.4mm x 0.2mm). Suitable for the SIPLACE D4/D2/D1 equipped with the 12 Collect & Place Head (DLM3). The component range will be from 01005 up to the maximum of 16mm x 16mm. The package includes: 1 x High res
-
Option Smart Pin Support is required once for the SX1/2 single and dual line per SX1/2. Prerequisit is transport type V2. This option includes the pin picker and depending on table position and nozzle changer configuration either a magzine L10 (119996) or
-
5 Standard Support Pins (type101) for the option Smart Pin Support. Dependant on the magazine type 10 pins (L10,Q10) or 5 pins (W5) can be accommodated.
-
SIPLACE Tape feeder for 1 x 88mm tape, with electric drive and cover tape storage bin, 4mm to 96mm feed increments, for SIPLACE F and HF/X/D-Series. 3.5 feeder locations required per module.
-
Tape feeder module 3x8mm SL SIPLACE
-
Feeder module for 1 x 12mm or 1 x 16mm tape (reconfigurable), 4mm - 16mm feeding pitch with motorized drive and integrated cover foil removal for SIPLACE 80S-15/20/F/F4, 1 feeder location required per module From SW version 402.03 ( S-20/F4) or 9.02
-
Feeder module for 1 x 24mm or 1 x 32mm tape (reconfigurable), 4 - 32mm feeding pitch with motorized drive and inte- grated cover foil removal for SIPLACE 80 S15/20/F/F4/F5/S23HM, 1 feeder locations required per module. From SW version 402.03 or 9.02
-
Feeder module for 1 x 44mm tape 4 - 44mm feeding pitch with mo- torized drive and integrated cover foil removal for SIPLACE 80F/F4. 2 feeder locations re- quired per module. From SW version 402.03 or 9.02
-
Feeder module for 1 x 56mm tape 4 - 56mm feeding pitch with motorized drive and integrated cover foil removal for SIPLACE 80F/F4 2,5 feeder locations required per module. From SW version 402.03 or 9.02
-
Feeder module for 1x72mm S-tape 4 - 72mm feeding pitch with mo- torized drive and integrated cover foil removal for SIPLACE 80 F/F4/F5