Searching for current and legacy Siplace parts is done easily and quickly with this simple tool. We continually monitor pricing from sources alternative to OEM and carry a large stock of spares at multiple locations.
If we do not currently stock the requested part, we forward your enquiry to our network of potential vendors and saving you valuable time. Images do not necessarily represent the actual products, but details of packaging are included in all quotes.
Requests for technical support or general enquiries can be made on the email link.
-
SCREW KIT FOR MINIATURE ROLLING TABLE
-
ISO 7046-2-M2 x 5-A2-70-H
-
cover handle
-
DIN EN ISO 7380-M3 x 8-A2-70
-
DIN 8243 A M1.2 x 1.8-ST
-
ISO 7045 - M2 x 4-A2-50-H
-
ISO 1207 - M3 x 6-A2-70
-
MOUNTING CLAMP d=5 H2P
-
DIN 471-5x0.6-C67
-
ISO 7045 - M2.5 x 6-A2-50-H
-
Pressure spring 0.75x6.25x31x8.5
-
O-Ring 6.7x0.8 NBR 70 black
-
DIN 988-5x10x0.1-St 2 K 50
-
ISO 4762 - M 3 x 20-A2-70
-
Cable clamp B=2,5mm L=102mm Panduit
-
Cable tie W=2.4mm L=92mm TYB-23M
-
ISO 7046-2-M2,5 x 8-A2-70-H
-
ISO 7046-2-M3 x 5-A2-70-H
-
ISO 7046-2-M3 x 8-A2-70-H
-
ISO 7046-2-M3 x 30-A2-70-H
-
DIN EN ISO 7380-M4 x 6-A2
-
DIN 988-3x6x0,1-1.4310
-
Washer 4*8*0,1
-
DIN 988-6x12x0.3-St 2 K 50
-
REMFORM-Screw RF-SN75-2,5 x 10-9.8
-
Foam sealing
-
ISO 4762 - M 5 x 18-8.8-E2JÂ
-
Shim DIN 988-6x12x0.5-St 2 K 50 Replacement by trained staff
-
Cable clamp d=5mm H2P polyamid
-
Cable tie w=4.8mm L=186mm TYB-25M
-
ISO 4762 - M 2,5 x 12-A2-70
-
DIN 471-6x0.7-C67
-
DISK 6 * 12 * 1 DIN 988
-
DIN 988-6x12x0.2-St 2 K 50
-
ISO 2009 - M1,6 x 3-A2-50
-
CYLINDER SCREW M2,5*6 SN213307 A2
-
PRESSION SPRING D-027
-
ISO 4762 - M6 x 25-8.8,chem.vern.
-
ISO 4035 - M 8-ST
-
ISO 7046-2-M2,5 x 10-A2-70-H
-
DIN EN ISO 4026 - M8 x 16-A2-21H
-
ISO 4762 - M 4 x 40-A2-70
-
ISO 14580 - M4 x 18-8.8,cu-pl.,ni-pl.
-
Pressure spring 0,85x5,1x18,3
-
Washer 3,2 V2a HN 160
-
CYLINDER SCREW M2*4 SN213307 A2
-
DIN 6325 - 3m6 x 10-St
-
Stud screw, hex sock. DIN913-M1.6x3-A2
-
DIN 988-8x14x1-1.4310
-
DIN 6325 - 1m5 x 4-St
-
SCREW M3*3 SN213307
-
DUST FUER IC HEAD
-
ISO 4035 - M 8-ST
-
CLIP / C+P
-
DIN 7991-M5 x 10-A2-70
-
DIN 6325 - 1h6 x 4-St
-
DIN 6325 - 4m6 x 10-St
-
ISO 4762 - M 2,5 x 10-A2-70
-
ISO 4762 - M 2,5 x 5-A2-70
-
AMP-LATCH CODE PIN
-
ISO 7046-2-M2,5 x 5-A2-70-H AV
-
Disc M1,6 DIN125 A - A2
-
GRIPPING RING
-
PIVOT Exchange by trained staff
-
Distanzstück F1066 (6,2mm 4-40UNC)
-
ROCKING LEVER /X2x8
-
ISO 4762 - M 1,6 x 4-12.9,verz.,DSP
-
DIN 7991-M4 x 10-A2
-
CABLE FIXING
-
Washer 4,3 V2a HN 160
-
DIN 466 M3-ST
-
Cup spring 24.7x15.4x0.4 galvanized
-
ISO 7380-M3 x 6-10.9 verz.,schw.chrom.
-
Fixing, Panduit TA type ?
-
DIN 923 M3 x 1,5-A2-50
-
DISTANCE HOLDER H=6,35
-
BOLT Type B i/a-M3x7-ST
-
O-RING 8*1 NBR 70B
-
O-ring 2,5*1 NBR 70 B
-
O-ring 10*1,5 NBR 70 B
-
DIN 6799 - 8-ST
-
COMPRESSION SPRING 0,16*1,36*6,7
-
ISO 4762 - M3 x 5-8.8,
-
ISO 4762 - M 3 x 6-8.8