Searching for current and legacy Siplace parts is done easily and quickly with this simple tool. We continually monitor pricing from sources alternative to OEM and carry a large stock of spares at multiple locations.
If we do not currently stock the requested part, we forward your enquiry to our network of potential vendors and saving you valuable time. Images do not necessarily represent the actual products, but details of packaging are included in all quotes.
Requests for technical support or general enquiries can be made on the email link.

  • Cover cap CV-PK-4-B PUR
  • Plastic Hose, PU-4, blue, 5m each
  • GRIPPING RING
  • DIN 6799 - 8-ST
  • Feeder Bags 650mm
  • PROTECTION COVER FOR INTERMEDIATE PCB
  • PACKAGE INSIDE FOR HEAD 6/12
  • PACKAGE FOR FEEDER 12/16 S
  • PACKAGE FOR FEEDER 24/32 S
  • PACKAGE FOR FEEDER 44 S
  • Pack for 3x8mmS-Feeder
  • PACKAGE FOR FEEDER 88 mm S
  • PLASTIC CASE 375*270*90 ESD
  • PE-FOAM INSERT FOR BOX 00325829-01
  • Gloves Leather
  • SCREW M4*10 DIN965
  • Disc 6,4 DIN125-A
  • DIN 471-5x0.6-C67
  • DIN 471-6x0.7-C67
  • DIN 6325-3m5x18-St
  • DEEP-GROVE BALL BEARING 4*13*5 624-2Z
  • DEEP-GROOVE BALL BEARING 5*16*5 625 2Z
  • DEEP-GROOVE BALL BEARING 19*6*6 626-2Z
  • BALL BEARING 8*22*7 608 2Z
  • Set placement head nozzle sleeves for SIPLACE 80S-20/F4/F5/S23HM/HS50 12 units, with air blow. Additional set for change over in case of cleaning purpose to raise station time.
  • Set Nozzle Sleeves (6) SIPLACE
  • Regulator unit for linear and bulk vibrator feeders for use with 142025 Type II. Required for use with SIPLACE . 1 regulator unit required per module.
  • Nozzle changer for 6 nozzle C+P Head SIPLACE 80 F4/F5 Station software version 403.xxx or higher Line computer software 403.xxx or higher Option includes: 2 magazines for big nozzles 3 magazines for small nozzles
  • Adapter plate SIPLACE S/F change-over table without wheels version 2 for reel holder 3x8mm or 3x8mm 0201/0402 feeder respectively
  • Kit to splice component tapes. Includes SIPLACE splicing gripper (classic version for single strips), splice strip box, tape connectors, tape threaders, holder, operater tools, Job Poster. For first equipping of new customers.
  • Additional component vision module SIPLACE 80 F/F4/F5 for flip chip bump centering. Field of view: 9mmx11.5mm. Largest flip chip with single measurement: 7mm x 9mm.Smallest,reliably recognizable bump diameter: 0,1mm. Reliable processing of IC pitch: 0,25m
  • Additional component vision module SIPLACE 80 F/F4/F5 for flip chip bump centering. Field of view: 9mmx11.5mm. Largest flip chip with single measurement: 7mm x 9mm.Smallest,reliably recognizable bump diameter: 0,1mm. Reliable processing of IC pitch: 0,25m
  • Additional nozzle changer for IC head
  • ESS Docking Unit for COTF-X (HW)
  • Dip module f. fluxes and adhesive
  • The component sensor as additional optical sensor module verifies the presence / absences of a small component short just before placement / pickup respectively. Suitable for all SIPLACE S-27 HM, X/D-Series and HS-xx in combination with the 12-Segment Col
  • Mechanical Head Crash Protection for SIPLACE S-20, S-23 HM, S-25 HM and S-27 HM to avoid a head crash with feeders and/or feeder flaps. Restriction 6-Segment Collect and Place Head with nozzels type 820/821/921.
  • The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location
  • CO camera, stationary P+P (type 20) 8x8
  • The Feeder Protection consists of a cover over the feed area (119622,119755). If a feeder is pressed up or if feeder flaps are projecting upwards, the EMERGENCY OFF is actuated. The option contains one protection plate, which can be installed in location
  • Additional high resolution, stationary component camera digital in X-Series,D1,D3 machines for centering of FlipChips. With this head a component range from 0.2mm x 0.2mm up to 16mm x 16mm can be placed. The smallest ball diameter is 80um, the min. Lead /
  • Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE X-Series (SCSW 605)equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange between standard digital component camera. T
  • Package for placement of 0201 components (size 0.6mm x 0.3mm). Suitable for SIPLACE D4i/D2i/D1i equipped with the 12-Segment Collect and Place head. The Package includes: High resolution camera (Exchange against standard digital component camera. The stan
  • Package for placement of 01005 components (size 0.4mm x 0.2mm). Suitable for the SIPLACE D4/D2/D1 equipped with the 12 Collect & Place Head (DLM3). The component range will be from 01005 up to the maximum of 16mm x 16mm. The package includes: 1 x High res
  • Option Smart Pin Support is required once for the SX1/2 single and dual line per SX1/2. Prerequisit is transport type V2. This option includes the pin picker and depending on table position and nozzle changer configuration either a magzine L10 (119996) or
  • 5 Standard Support Pins (type101) for the option Smart Pin Support. Dependant on the magazine type 10 pins (L10,Q10) or 5 pins (W5) can be accommodated.
  • SIPLACE Tape feeder for 1 x 88mm tape, with electric drive and cover tape storage bin, 4mm to 96mm feed increments, for SIPLACE F and HF/X/D-Series. 3.5 feeder locations required per module.
  • Tape feeder module 3x8mm SL SIPLACE
  • Feeder module for 1 x 12mm or 1 x 16mm tape (reconfigurable), 4mm - 16mm feeding pitch with motorized drive and integrated cover foil removal for SIPLACE 80S-15/20/F/F4, 1 feeder location required per module From SW version 402.03 ( S-20/F4) or 9.02
  • Feeder module for 1 x 24mm or 1 x 32mm tape (reconfigurable), 4 - 32mm feeding pitch with motorized drive and inte- grated cover foil removal for SIPLACE 80 S15/20/F/F4/F5/S23HM, 1 feeder locations required per module. From SW version 402.03 or 9.02
  • Feeder module for 1 x 44mm tape 4 - 44mm feeding pitch with mo- torized drive and integrated cover foil removal for SIPLACE 80F/F4. 2 feeder locations re- quired per module. From SW version 402.03 or 9.02
  • Feeder module for 1 x 56mm tape 4 - 56mm feeding pitch with motorized drive and integrated cover foil removal for SIPLACE 80F/F4 2,5 feeder locations required per module. From SW version 402.03 or 9.02
  • Feeder module for 1x72mm S-tape 4 - 72mm feeding pitch with mo- torized drive and integrated cover foil removal for SIPLACE 80 F/F4/F5
  • Feeder with tape return mechanism for tantalum capacitor types E for 1 x 12mm tape with electric motor and cover foil pick-up, 4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23 and SIPLACE 80 F/F4/F5 HM.
  • Feeder with tape return mechanism for tantalum capacitor types C/D for 1 x 12mm tape with electric motor and cover foil pick-up, 4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23 and SIPLACE 80 F/F4/F5 HM.
  • Feeder module for 1 x 24mm or 1 x 32mm tape (configurable),up to 25mm tape height,4mm/40mm feeding pitch, with motorized drive and integrated cover foil removal,for SIPLACE. 1,5 feeder locations required per module. From SW version V402.03.
  • Feeder module for 1 x 44mm tape,up to 25mm tape height,4mm/52mm feeding pitch, with motorized drive and integrated cover foil removal,for SIPLACE F and HF/X-Series. 2 feeder locations required per module. From SW version V402.03 or V9.02.
  • Feeder module for 1 x 56mm tape,up to 25mm tape height,4mm/68mm feeding pitch, with motorized drive and integrated cover foil removal,for SIPLACE F and HF/X-Series. 2,5 feeder locations required per module. From SW version V402.03 or V9.02.
  • Tape Feeder Module 2x8mm X smart
  • Tape Feeder Module 8mm X for 1 x 8mm component tape, motorized drive, cover foil storage and unique feeder ID for SIPLACE X-Series. Feeder pitch sent automatically from the programming system or set at feeder control panel.
  • Tape Feeder Module 12mm X
  • Tape Feeder Module 16mm X
  • Tape Feeder Module 24mm X for 1 x 24mm component tape, motorized drive, cover foil storage and unique feeder ID for SIPLACE X-Series. Feeder pitch sent automatically from the programming system or set at feeder control panel.
  • Tape Feeder Module 32mm X for 1 x 32mm component tape, motorized drive, cover foil storage and unique feeder ID for SIPLACE X-Series. Feeder pitch sent automatically from the programming system or set at feeder control panel.
  • Tape Feeder Module 44mm X for 1 x 44mm component tape, motorized drive, cover foil storage and unique feeder ID for SIPLACE X-Series. Feeder pitch sent automatically from the programming system or set at feeder control panel.
  • Tape Feeder Module 56mm X for 1 x 56mm component tape, motorized drive, cover foil storage and unique feeder ID for SIPLACE X-Series. Feeder pitch sent automatically from the programming system or set at feeder control panel.
  • Tape Feeder Mod. 2x8mmX w. Splice Sensor
  • Tape Feeder Mod. 8mm X w. Splice Sensor
  • Tape Feeder Module 12mm X with Splice Sensor for 1 x 12mm component tape, motorized drive, cover foil storage and unique feeder ID for SIPLACE X-Series. Feeder pitch sent automatically from the programming system or set at feeder control panel. Attention:
  • Tape Feeder Mod. 16mm X w. Splice Sensor.
  • Tape Feeder Mod. 24mm X w. Splice Sensor.
  • Tape Feeder Mod. 32mm X w. Splice Sensor.
  • Tape Feeder Mod. 44mm X w. Splice Sensor.
  • Tape Feeder Mod. 56mm X w. Splice Sensor.
  • Tape Feeder Mod. 72mm X w. Splice Sensor.
  • Tape Feeder Mod. 88mm X w. Splice Sensor.
  • SIPLACE SmartFeeder 12mm X
  • SIPLACE SmartFeeder 16mm X
  • SIPLACE SmartFeeder 12mm X Splice Sensor
  • SIPLACE SmartFeeder 16mm X Splice Sensor
  • Linear vibration feeder module for components in stick maga- zines. Magazine width 4,5mm 9.5mm, 15mm, 30mm - SIPLACE 80S / 80F - MS/SP/HS With SIPLACE machines item no. 116140 required, with MS-72/90/128/SP/HS machines and integrated potentiometer item no
Go to Top